China best New Designed 1.5ton CE Approved Small Compacted Agricultural Telescopic Wheel Loader for Sale near me supplier

Product Description

STEEL CZPT TELESCOPIC Wheel Loader M915 Telescopic Mini Loader with CE/EPA

 

Product Description

STEEL CZPT M915 telescopic wheel loader is quite a multifunctional machine, you can use it for various work, like farming, gardenning, landscaping, animal house, construction, bee keeping, minicipal work etc.

It is a new design to the market which besides the normal function of loaders, also have rear output and 3 point hitch for attachments to be used at the rear end, thus it can be used as both a loader or a tractor

Different with normal wheel loaders with torque converter, it adopts fully hydrostatic system, 4 hydraulic wheel motors driving the loader, smooth and vraible speed change, no worn parts, free maintenance

Product Parameters

 

Detailed Photos

Wide view cabin with double doors, more user friendly.

Adjusting steering column, always a comforable position for the operator

Standard heating system and optional A.C offer full weather comfort.

Telescopic boom increase the lifting height.

Front hydraulic and electric output for various attachments

Hydraulic quick hitch

Compact size, articulated structure, small turning radius
 

Tilt Cabin design, full access to inner parts.

Hydrostatic transmission by pump and 4 wheel motors, variable speed

Flexible articulation, best through ability for all terrain

Optional rear output and 3 point hitch, switch between a loader and tractor.

Plus front quick hitch and more than 50 attachments, money for 1 machine, you get solution for all your work, no matter farming, construction, forestry, gardening, landscaping

One stop money and time saving solution

 

Packaging & Shipping

Thanks to the compact design of STEEL CZPT M915 mini telescopic loader, it can be driven into container directly and fully assembled.

Loading condition:1 sets/20ft GP; 3sets/40ft GP

Till now, we have exported to More than 20 countries, for example:Germany, Poland, Austria, Holland, Switzerland, USA, Australia, South Africa, etc.
 

Product Application

Loader+Tractor, 1 Multi-purpose helper for all your works

Front part is loader, with telescopic boom, hydraulic output, quick hitch and coupling system for various attachments, like bucket, fork, grapple, auger, hammer, lawn mower, etc.

Rear part is tractor, with hydraulic output, 3-point hitch, hydraulic PTO, for rotary tiller, flail mower, plough, harrow, trailer, etc.
STEEL CZPT series machines are widely used in farming, agriculture, landscaping, gardening, construction, municiple, etc.

Company Profile

ZheJiang CZPT Machinery Co., Ltd was established by a rich experienced engineering and marketing team, this guarantees the continuously development of the company. 

 

Since established, we have developed 3 range, more than 50 kinds of different products, covering telescopic loader, telehandler and various attachments.  

 

Our brandname “STEEL CAMEL” expresses our pursue of quality. Every STEEL CZPT product, no matter big complete machine or small attachments, was designed for rough use and long lasting, just like the CZPT working in the desert with little water, always offer more service and need less servicing.

 

We devoted to offer excellent purchasing and user experience to every of our customer. To us the deal time is not finishing time, but just the opposite, is the beginning time of service. The following, we’ll assist customer of transporting, teach customer how to use and maintainence the machine, follow up the usage of the products. One time purchase, whole lifetime service.

 

We looking forward to do business with customers worldwide with 100% honesty and biggest sincerity.


Direct Manufacturer, 100% Guarantee!!!

We are direct manufacture factory, every aspect in a deal that customer concerns is guaranteed, like price, quality, delivery time and after service.

We devoted to offering 1 stop shopping and solution to customers’ needs. The products we currently offer covering loaders, telehandlers, excatators and loader attachments. Besides we have our own engineering team, can make customized design/product.

“Honest” is our business way. We appreciate customers’ trust, and we are always CZPT as return.

We choose “STEEL CAMEL” as our brandname, as all our products were designed for heavy duty work, trouble less and more service, like the what the CZPT do for people.


Model M915 compact construction wheel loader
Dimension with cabin (LxWxH) 3400X1500X2300mm
Max. lifting height (boom retract) 3000mm
Max. lifting height (boom extend) 3562mm
Bucket capacity 0.8cbm
Max. loading capacity 1500kg
Min. turning radius 2800mm
Turning angle 450
Min. ground clearance 330mm
Speed 0-12~24 km/h
Weight with bucket and counterweight 2300 kg
Standard tire 31X15.5-15
Working oil flow 41L/minx2
Tracking oil flow 120L/min
Engine Chiese/Yanmar/Euro 5/EPA Tier 4
Rated power 58hp
Model M915 compact construction wheel loader
Dimension with cabin (LxWxH) 3400X1500X2300mm
Max. lifting height (boom retract) 3000mm
Max. lifting height (boom extend) 3562mm
Bucket capacity 0.8cbm
Max. loading capacity 1500kg
Min. turning radius 2800mm
Turning angle 450
Min. ground clearance 330mm
Speed 0-12~24 km/h
Weight with bucket and counterweight 2300 kg
Standard tire 31X15.5-15
Working oil flow 41L/minx2
Tracking oil flow 120L/min
Engine Chiese/Yanmar/Euro 5/EPA Tier 4
Rated power 58hp

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from one side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
air-compressor

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are two types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at one end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are two types of lug structures: one is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

Tags:

pto part

As one of leading pto part manufacturers, suppliers and exporters of products, We offer pto part and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto part

Recent Posts